Using the operating system media – Dell Vostro 200 (Mid 2007) User Manual
Page 96
96
Troubleshooting Tools
4 To access the recovery options, log on as a local user. To access the
command prompt, type
administrator
in the User name field, then
click OK.
5 Click Dell Factory Image Restore.
NOTE:
Depending upon your configuration, you may need to select Dell
Factory Tools, then Dell Factory Image Restore.
The Dell Factory Image Restore welcome screen appears.
6 Click Next.
The Confirm Data Deletion screen appears.
NOTICE:
If you do not want to proceed with Factory Image Restore, click Cancel.
7 Click the checkbox to confirm that you want to continue reformatting the
hard drive and restoring the system software to the factory condition, then
click Next.
The restore process begins and may take five or more minutes to complete.
A message appears when the operating system and factory-installed
applications have been restored to factory condition.
8 Click Finish to reboot the system.
Using the Operating System Media
Before you Begin
If you are considering reinstalling the Windows operating system to correct a
problem with a newly installed driver, first try using Windows Device Driver
Rollback. See "Reinstalling Drivers and Utilities" on page 88. If Device Driver
Rollback does not resolve the problem, then use System Restore to return your
operating system to the operating state it was in before you installed the new
device driver. See "Using Microsoft
NOTICE:
Before performing the installation, back up all data files on your primary
hard drive. For conventional hard drive configurations, the primary hard drive is the
first drive detected by the computer.
To reinstall Windows, you need the following items:
•
Dell™ Operating System media
•
Dell Drivers and Utilities media