Ect settings in step 11 – Dell Vostro 200 (Mid 2007) User Manual
Page 144
144
Removing and Installing Parts
8 Replace the computer cover (see "Replacing the Computer Cover" on
9 Replace the support bracket (see "Replacing the Support Bracket" on
NOTICE:
To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
10 Connect your computer and devices to electrical outlets, and then turn
them on.
11 Enter system setup (see "System Setup" on page 170) and restore the
settings you recorded in Step 1. Then go to the Maintenance section and
clear the low battery and other errors associated with the battery
replacement in the Event Log.
12 Properly dispose of the old battery.
See the Product Information Guide for battery disposal information.
1
battery release lever
2
battery (positive side)
2
1