Dell OptiPlex 330 (Late 2007) User Manual
Page 81
4.
If you are installing a new card, remove the filler bracket to create a card- slot opening.
5.
If you are replacing a card that is already installed in the computer, remove the card. If necessary, disconnect any cables connected to the card.
6.
Prepare the card for installation.
7.
Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.
8.
If you are installing the PCI Express card into the x16 card connector, position the card so the securing slot is aligned with the securing tab.
9.
Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.
1
release tab
2
card
3
card-edge pins
4
card connector
NOTE:
See the documentation that came with the card for information on configuring the card, making internal connections, or customizing it for your
computer.
CAUTION:
Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be
sure to unplug your computer from its electrical outlet before installing any cards.
1
card fully seated
2
card not fully seated
3
bracket within slot
4
bracket caught outside of slot