Dell PowerEdge RAID Controller H200 User Manual
User’s guide
Advertising
Table of contents
Document Outline
- CAUTION: Safety Instructions
- Overview
- PERC H200 and 6Gbps SAS HBA Features
- Hardware Installation
- Driver Installation
- Installing the Windows Driver
- Creating the Driver Media
- Pre-Installation Requirements
- Installing the Driver During a Windows Server 2003 Operating System Installation
- Installing the Driver During a Windows Server 2008 or Windows Server 2008 R2 Installation
- Installing a Windows Server 2003, Windows Server 2008 or Windows Server 2008 R2 Driver for a New RAID Controller
- Updating the Windows Driver
- Installing Linux Driver
- Creating a DUD Using DKMS
- Installing the Windows Driver
- PERC H200 and 6Gbps SAS HBA BIOS
- POST Messages
- Configuration Utility
- RAID Configuration and Management Screens
- Performing Configuration Tasks
- Creating a RAID 0 Virtual Disk
- Creating a RAID 1 Virtual Disk
- Creating a RAID 10 Virtual Disk
- Viewing Virtual Disk Properties
- Activating a Virtual Disk
- Migrating and Activating a Virtual Disk
- Deleting a Virtual Disk
- Hot Spare Failover
- Replacing and Rebuilding a Degraded Virtual Disk
- Assigning a Preferred Boot Device
- Troubleshooting
- Updating the Firmware
- Getting Help
- Regulatory Notices
- Corporate Contact Details (Taiwan Only)
- Glossary
- Index