Dell PowerEdge RAID Controller H200 - Manual (Page 23)

PERC H200 and 6Gbps SAS HBA Features
23
LED Port Activity Feature for 6Gbps SAS HBA Only
The 6Gbps SAS HBA controllers are equipped with port activity or
status LEDs. The LEDs enable you to quickly determine the status of
an external SAS port. Each x4 connector has its own set of LEDs.
Table 3-3 describes the color of the LEDs and corresponding SAS port state.
Table 3-3. x4 Connector LEDs Description
LED Color SAS Port State
Off It means any one of the following:
• Power is off.
• Port has been reset.
• All links in the port are either
disconnected or the cable is
disconnected.
Green All links in the port are connected and
functional.
Amber One or more links in the port is not
connected. This is only applicable
in a wide port configuration.
PERC H200.book Page 23 Tuesday, July 13, 2010 4:15 PM