Dell PowerEdge RAID Controller H200 - Manual (Page 40)

40
Driver Installation
Installing SUSE Linux Enterprise Server Using the DUD
NOTE:
For information about creating a driver diskette, see "Creating a DUD" on
page 37.
To install SUSE Linux Enterprise Server using the DUD:
1 Insert the appropriate SUSE Linux Enterprise Server Service Pack media
in the system.
2 For SLES 10, select <F5> for the DUD. For SLES 11, select <F6>.
The system displays three options: Yes, No, and File.
Choose Yes to install the driver.
3 Select Installation from the menu.
4 Press <Enter> to load the Linux kernel.
5 At the prompt Please insert the driver update floppy, click OK.
The system selects the driver from the diskette and installs it.
The system displays the message DRIVER UPDATE ADDED with the
description of the driver module.
6 Click OK.
If you want to install from another driver update medium, continue with
the following steps.
7 The system displays the message PLEASE CHOOSE DRIVER UPDATE
MEDIUM.
8 Select the appropriate driver update medium.
The system selects the driver from the disk and installs it.
PERC H200.book Page 40 Tuesday, July 13, 2010 4:15 PM