Dell B5460dn Mono Laser Printer - Manual (Page 110)

Use To
Blank Pages
Do Not Print
Print
Specify if blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
1 This menu appears only in touch
‑screen printer models.
2 This menu appears only in non
‑touch‑screen printer models.
Print Settings
Setup menu
Use To
Printer Language
PCL Emulation
PS Emulation
Set the default printer language.
Notes:
• PCL Emulation is the factory default setting.
• PostScript emulation uses a PostScript interpreter for
processing print jobs.
• PCL Emulation uses a PCL interpreter for processing print
jobs.
• Setting a printer language default does not prevent a
software program from sending print jobs that use another
printer language.
Job Waiting
On
Off
Determine if print jobs are removed from the print queue when
they require unavailable printer options or custom settings. These
print jobs are stored in a separate print queue, so other jobs print
normally. When the missing information or options, or both are
obtained, the stored jobs print.
Notes:
• Off is the factory default setting.
• This menu appears only if a non-read
‑only printer hard disk
is installed. This requirement ensures that stored jobs are
not deleted if the printer loses power.
Print Area
Normal
Whole Page
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data in the non
‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
• Whole Page allows the image to be moved into the
non
‑printable area defined by the Normal setting, but the
printer clips the image at the Normal setting boundary. This
setting affects only pages printed using a PCL 5e interpreter
and has no effect on pages printed using the PCL XL or
PostScript interpreter.
Understanding the printer menus 110