Insufficient memory to collate job [37, Load staples – Dell B5460dn Mono Laser Printer User Manual
Page 171
Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, press
to print the portion of the job already stored and begin collating the rest
of the print job.
•
Cancel the current print job.
Insufficient memory to support Resource Save feature [35]
Try one or more of the following:
•
From the printer control panel, press
to disable Resource Save, clear the message, and continue printing.
•
Install additional printer memory.
Load staples
Try one or more of the following:
•
Replace or insert the specified staple cartridge in the finisher.
For more information, see the “Replacing supplies” section of the User’s Guide.
•
From the printer control panel, press
to clear the message and continue printing.
•
Cancel the print job.
Load [paper source] with [custom string] [orientation]
Try one or more of the following:
•
Load the indicated tray or feeder with the correct size and type of paper.
•
From the printer control panel, press
to clear the message and continue printing.
Note: If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the
printer cannot find a tray that has the correct size and type of paper, then it prints from the default paper
source.
•
Cancel the current job.
Load [paper source] with [custom type name] [orientation]
Try one or more of the following:
•
Load the tray or feeder with the correct size and type of paper.
•
From the printer control panel, press
to clear the message and continue printing.
Note: If the printer finds a tray that has the correct size and type of paper, then it feeds from that tray. If the
printer cannot find a tray that has the correct size and type of paper, then it prints from the default paper
source.
•
Cancel the current job.
Troubleshooting
171