Dell B5460dn Mono Laser Printer - Manual (Page 214)

Uneven print density
Action Yes No
Replace the imaging unit, and then resend the print job.
Is the print density uneven?
Contact technical
support .
The problem is solved.
Vertical voids appear on prints
Leading edge
Trailing edge
Action Yes No
Step 1
a Make sure your software program is using a correct fill pattern.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 2. The problem is solved.
Step 2
a From the printer control panel, set the paper type and weight in the
Paper menu to match the paper loaded in the tray.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 3. The problem is solved.
Step 3
Check if you are using a recommended type of paper.
a Load the specified tray or feeder with a recommended type of paper.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 4. The problem is solved.
Troubleshooting 214