Cooling fan – Dell LATITUDE D400 User Manual
Page 15
Back to Contents Page
Cooling Fan
1.
Follow the instructions in "
Preparing to Work Inside the Computer
" to remove the battery and prepare the computer for work.
2.
Remove any installed
memory modules
, smart card,
modem
, or PC Card.
3.
Remove the
hard drive
.
4.
Remove the
keyboard
.
5.
Remove the
display
.
6.
Remove the
palm rest
.
7.
Remove the fan cable from the fan extender cable that runs under the system board.
8.
Remove the three M2 x 5-mm screws that secure the cooling fan.
9.
Lift out the cooling fan.
Back to Contents Page
CAUTION:
Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 fan cable
2 M2 x 5-mm screws (3) 1428U