Dell LATITUDE D400 - Manual (Page 27)

Back to Contents Page
Mini PCI Card
1. Follow the instructions in " Preparing to Work Inside the Computer " to remove the battery and prepare the computer for work.
2. Remove the keyboard .
3. If a Mini PCI card is not already installed, go to step 4 . If you are replacing a Mini PCI card, remove the existing card:
a. Disconnect the Mini PCI card from the attached cables.
b. Release the Mini PCI card by spreading the metal securing tabs until the card pops up slightly.
c. Lift the Mini PCI card out of its connector.
CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 antenna cables (2)
2 Mini PCI card 9Y200
3X548
J0846