Battery latch – Dell LATITUDE D400 User Manual
Page 22

Back to Contents Page
Battery Latch
1.
Follow the instructions in "
Preparing to Work Inside the Computer
" to remove the battery and prepare the computer for work.
2.
Remove any installed
memory modules
, smart card,
modem
, or PC Card.
3.
Remove the
keyboard
.
4.
Remove the
display
.
5.
Remove the
palm rest
.
6.
Remove the
system board
.
7.
Press down on the battery latch to remove it.
8.
Press in the spring and pull up on the battery latch locking arm.
Back to Contents Page
CAUTION:
Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 spring
2 battery latch
3 battery latch locking arm