Dell LATITUDE D400 - Manual (Page 3)

Recommended Tools
The procedures in this manual require the following tools:
l Phillips screwdriver
l Flat-blade screwdriver
l Small plastic scribe
l Flash BIOS update program floppy disk or CD
Computer Orientation
Screw Identification
When you are removing and replacing components, photocopy " Screw Identification " as a tool to lay out and keep track of the screws. The screw identification
chart provides the number of screws and their sizes.
1 back
2 right
3 front
4 left
keyboard
(two each)
modem
(one each)
hard drive
(four each)