Flashing the bios – Dell LATITUDE D400 User Manual

Page 5

Advertising
background image

Back to Contents Page

 

Flashing the BIOS

1.

 

Ensure that the AC adapter is plugged in and that the main battery is installed properly.

 

2.

 

Insert the BIOS update program floppy disk or CD, and turn on the computer.

 

Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the
computer automatically reboots.

3.

 

Press <F2> during POST to enter the system setup program.

4.

 

Press <Alt> and <F> to reset the computer defaults.

5.

 

Press <Esc>, select Save changes and reboot, and press <Enter> to save configuration changes.

6.

 

Remove the flash BIOS update program floppy disk or CD from the drive and restart the computer.

 

 

Back to Contents Page

 

NOTE:

If you use a BIOS update program CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD.

Advertising