Dell PowerVault DP600 - Manual (Page 67)

67
critical alerts, warning alerts, informational alerts, or any combination of these).
• Under Recipients, type the e-mail address for each recipient (including yourself) to
whom you want DPM to send copies of the notifications. Use commas to separate
the e-mail addresses.
3. To test the notification settings, click Send Test Notification, and then click OK.
Configuring the SMTP Server
System Center Data Protection Manager (DPM) 2007 provides options for subscribing to alert
notifications and to reports by e-mail. If you plan to enable either of these features, you must first
configure the Simple Mail Transfer Protocol (SMTP) server that you want DPM to use to send e-
mail. Then specify which e-mail server you want to use.
For added security, the SMTP server can be configured as authenticated. When an SMTP server
is authenticated, DPM requires a specified user name and password for the server when sending
e-mail notifications and reports.
Note
DPM supports sending e-mail through both authenticated SMTP servers and
unauthenticated SMTP servers.
Procedures
To configure DPM to use an SMTP server that does not require authentication
1. In DPM Administrator Console, on the Action menu, click Options.
2. In the Options dialog box, on the SMTP Server tab, type the SMTP server name, the
SMTP server port, and the e-mail address you want to display in the From box of the e-
mail messages that DPM sends.
The e-mail address in the From box must be a valid e-mail address on the SMTP server.
3. To test the SMTP server settings, click Send Test E-mail, type the e-mail address to
where you want DPM to send the test message, and then click OK.
To configure DPM to use an SMTP server that requires authentication
1. In DPM Administrator Console, on the Actions menu, click Options to display
the Options dialog box.
2. On the SMTP Server tab, type the SMTP server name, the SMTP server port, and the e-
mail address you want to display.
3. In the Authenticated SMTP server area, type a user name and password in the