Dell INSPIRON 2600 - Manual (Page 19)

10. Remove the tape that secures the display panel connector and the tape that secures the middle of the display-feed flex cable to the display panel.
11. Pull the top flex-cable connector down and away to remove it from the display panel connector.
Replacing the 14.1-Inch Display Panel
1. Reconnect the top flex cable connector to the display panel connector.
2. Reconnect the bottom flex cable connector to the inverter connector on the system board.
3. Replace the tape that secures the display panel connector and the tape that secures the middle of the display-feed flex cable to the display panel.
4. Place the bottom edge of the display panel in the bottom of the top cover, and elevate the top of the panel with your hand.
5. Lay the display panel in the top cover.
6. Reinstall the four M2 x 3-mm screws that secure the display panel to the top cover.
7. Reinstall the M2.5 x 5-mm screw that secures the display-feed flex cable to the display assembly.
15-Inch Display
2 display panel connector
3 pull tab
4 pull tab
5 inverter connector on
system board
6 bottom flex-cable
connector
1 screw covers (5) 6 M2 x 3-mm screws (8)
2 M2.5 x 5-mm screws (5) 7 M2.5 x 5-mm screw (1)
3 display bezel 8 display-feed flex cable
4 display panel 9 flex-cable retention bracket
5 M2.5 x 5-mm screws (2) 10 top cover