Dell INSPIRON 2600 User Manual
Page 39
Advertising
7.
Turn the computer over, and disconnect the touch pad connector and power board connector from the system board.
8.
Starting at the back center of the palm rest, use your fingers to separate the palm rest from the base plastics by lifting the inside of the palm rest while
pushing in on the outside.
Back to Contents Page
1 M2.5 x 8-mm screws (12)
1 back center of the palm
rest
2 touch pad connector
3 power board connector
NOTICE:
Carefully separate the palm rest from the base plastics to avoid damage to the palm rest.
Advertising