Dell INSPIRON 2600 - Manual (Page 37)

Replacing the Inspiron 2650 Video Card
1. Align the top-right corner of the video card with the guide on the system board, and slide the top edge of the video card under the palm rest.
2. Lay the video card flat on the system board, and connect the video card connector to the interface connector on the system board.
1 video card
2 M2.5 x 8-mm screw (1)
3 pull tab
1 M2.5 x 8-mm screw (1)
2 palm rest
3 top-right corner of the
video card
4 guide
NOTICE: Before you connect the video card to the system board, ensure that you route the power-board flex cable under the memory module.