Dell INSPIRON 2600 - Manual (Page 36)

3. Reinstall the M2.5 x 5-mm screw that secures the video card to the bottom case.
4. Replace the EMI shield .
5. Replace the keyboard .
Removing the Inspiron 2650 Video Card
1. Remove the keyboard .
2. Remove the EMI shield .
3. Remove the M2.5 x 8-mm screw that secures the video card to the system board.
4. Pull the video card by the pull tab toward the front of the computer to remove the video card from the bottom case.
1 bottom of video card
2 video card connector
3 system board
4 interface connector
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed battery.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read " Preparing to Work Inside the Computer " before performing the following procedure.