Dell INSPIRON 2600 User Manual
Page 65
g.
Reinstall the hard drive cage, and reinstall the two M2.5 x 5-mm screws that secure the hard drive cage to the system board.
h.
Reinstall the floppy drive cage, and reinstall the two M2.5 x 5-mm screws that secure the floppy drive cage to the system board.
2.
Replace the
speakers
.
3.
Replace the
microprocessor
and the
microprocessor thermal-cooling assembly
that you removed from the old system board.
4.
Replace the
palm rest
.
5.
Replace the
video card
and the
EMI shield
that you removed from the old system board.
6.
Replace the
display assembly
and the
keyboard
.
7.
Replace the
floppy drive
,
optical drive
,
modem
,
memory module
, and
hard drive
.
8.
If applicable, replace the PC Card in the PC Card slot.
9.
Replace the battery.
10.
Connect the AC adapter to your computer and to an electrical outlet.
11.
Turn on the computer.
12.
Insert the floppy disk or CD that accompanied the replacement system board into the appropriate drive, and turn on the computer. Follow the
instructions on the screen.
Back to Contents Page
1 modem-cable grounding
terminal
2 M2.5 x 4-mm screws (6)
NOTICE:
Route cables so that they will not be crimped or pinched when the complete assembly is put back together.
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
HINT:
After replacing the system board, enter the computer service tag sequence into the BIOS of the replacement system board.