Dell Dimension 2350 User Manual
Page 81
Adding Parts
81
NOTE: Some computers come with only two extra alignment screws; others come with four. You
only need two alignment screws for this procedure.
10
Gently slide the drive into place.
11
Once the drive is in place, apply pressure to ensure that the drive is fully seated.
12
Use the securing screw that came with the drive to attach the drive to the computer.
CAUTION: Match the colored strip on the cable with pin 1 on the drive (pin 1 is
marked as "1").
13
Connect the power cable to the system board.
14
Locate the data cable from the CD or DVD drive in the upper drive bay and connect
its middle data connector to the new drive.
15
Check all cable connections, and then fold the cables out of the way to provide airflow
for the fan and cooling vents.
drive
alignment screws (2)
securing
screw
extra alignment
screws (2 or 4)