Dell Dimension 2350 - Manual (Page 99)

Appendix 99
4 Remove the battery by carefully prying it out of its socket with your fingers or with a
blunt, nonconducting object such as a plastic screwdriver.
NOTICE: To avoid damage to the system board while you pry the battery loose, be sure to insert
the plastic screwdriver between the battery and the socket (not the system board).
5 Insert the new battery into the socket with the side labeled "+" facing up and snap the
battery into place.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
6 Connect your computer and devices to electrical outlets, and turn them on.
7 Access the system setup program (see page 95) and restore the settings you recorded in
step 1.
8 Properly dispose of the old battery (see page 14).
Dell Technical Support Policy (U.S. Only)
Technician-assisted technical support requires the cooperation and participation of the
customer in the troubleshooting process and provides for restoration of the operating
system, application software, and hardware drivers to the original default configuration as
shipped from Dell, as well as the verification of appropriate functionality of the computer
and all Dell-installed hardware. In addition to this technician-assisted technical support,
online technical support is available at support.dell.com. Additional technical support
options may be available for purchase.
battery socket
battery