Display, Opening the display – Dell Adamo XPS (Late 2009) User Manual
Page 28
Back to Contents Page
Display
Adamo XPS™ Service Manual
Opening the Display
1.
Follow the instructions in
Before You Begin
.
2.
Place the computer on a flat surface.
3.
Open the display
using the latch swipe sensor:
a.
Connect the AC adapter cable to the computer. Connect the other end of the AC adapter cable to a power outlet.
b.
Swipe the latch swipe sensor and lift to open the display.
using the release latch:
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To avoid damage to the computer, use only the battery designed for this particular Dell™ computer. Do not use batteries designed for
other Dell computers.
NOTE:
To open the display, you must connect your computer to a power outlet or the computer battery must be charged.
1
AC adapter cable
1
latch swipe sensor
2
display
NOTE:
Use the release latch to open the display when your computer is not powered using an AC adapter or battery.