Dell Adamo XPS (Late 2009) - Manual (Page 8)

1. Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer ).
3. Disconnect your computer and all attached devices from their electrical outlets.
4. Place your computer against an object for support before you start removing or replacing components.
Back to Contents Page
CAUTION: To help prevent damage to the system board, remove the computer battery (see Removing the Computer Battery ) before working
inside the computer.
CAUTION: To prevent damage to the display hinges, ensure that you do not adjust the angle between the display and the computer base after
removing the palm rest assembly.