Dell Adamo XPS (Late 2009) - Manual (Page 5)

2. Align the computer battery in the battery bay.
3. Rotate the battery into the computer until it snaps in place.
Removing the Coin-Cell Battery
1. Follow the instructions in Before You Begin .
2. Remove the computer battery (see Removing the Computer Battery ).
3. Open the display (see Opening the Display ).
4. Remove the palm rest assembly (see Removing the Palm Rest Assembly ).
5. Disconnect the coin-cell battery cable from the connector on the system board.
6. The coin-cell battery is glued to the system board. Using a plastic scribe pry the coin-cell battery out of the system board.
Replacing the Coin-Cell Battery
1. Follow the instructions in Before You Begin .
2. Use the adhesive on the coin-cell battery and adhere it to the system board.
3. Connect the coin-cell battery cable to the connector on the system board.
4. Replace the palm rest assembly (see Replacing the Palm Rest Assembly ).
5. Replace the computer battery (see Replacing the Computer Battery ).
Removing the Bridge Battery
1. Follow the instructions in Before You Begin .
2. Remove the computer battery (see Removing the Computer Battery ).
3. Open the display (see Opening the Display ).
1 coin-cell battery connector 2 coin-cell battery
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.