Drives, About the drives in your computer, Recommended drive cable connections – Dell Vostro 410 (Late 2008) User Manual

Page 14: Connecting drive cables

Advertising
background image

Back to Contents Page

 

Drives

Dell™ Vostro™ 410 Service Manual 

  

About the Drives in Your Computer

  

Hard Drives

  

Floppy Drive

  

Media Card Reader

  

Optical Drive


 

 

 

About the Drives in Your Computer

Your computer supports a combination of these devices:

l

 

Up to four 3.5-inch SATA hard drives

l

 

Up to three SATA 5.25-inch optical drives (with a maximum of two

3.5-inch SATA hard drives installed at the same time)

l

 

One optional Floppy Drive or optional Media Card Reader (FlexBay)

 

Recommended Drive Cable Connections

l

 

Connect serial ATA hard drives to connectors labeled "SATA0," "SATA1," "SATA2," or "SATA3" on the system board.

l

 

Connect serial ATA CD or DVD drives to connectors labeled "SATA4" or "SATA5" on the system board.

 

Connecting Drive Cables

When you install a drive, you connect two cables—a DC power cable and a data cable—to the back of the drive.

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

1 drive bay

2 optional optical drive

3 optional drive

4 optional FlexBay (Floppy Drive or Media Card

Reader)

5 3.5-inch SATA drive bays

(4)

 

 

Advertising