Dell Vostro 410 (Late 2008) - Manual (Page 19)

10. Check all cable connections, and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
11. Replace the bezel (see Replacing the Bezel ).
12. Perform the steps in the procedure After Working on Your Computer .
13. See the documentation that came with the drive for instructions on installing any software required for drive operation.
14. Enter system setup and select the appropriate Diskette Drive option (see Entering System Setup ).
15. Verify that your computer works correctly by running the Dell Diagnostics. See your Setup and Quick Reference Guide for help with Dell Diagnostics.
Removing the FlexBay Break-Away Metal Plate
Align the tip of a Phillips screwdriver with the slot on the break-away metal plate and rotate the screwdriver outwards to break and remove the metal plate.
Removing the Drive Panel Insert
Release the drive panel insert by pushing out the left side of the insert from the chassis.
1 screws (2) 2 optional floppy drive
3 power cable 4 data cable
1 break-away metal plate