Dell PowerEdge T110 User Manual

Page 26

Advertising
background image

26

About Your System

No boot device

available.

Faulty or missing optical
drive subsystem, hard drive,
or hard-drive subsystem, or
no bootable USB key
installed.

Use a bootable USB key, CD,
or hard drive. If the problem
persists, see "Troubleshooting
a USB Device" on page 106,

"Troubleshooting an Optical
Drive" on page 115, and
"Troubleshooting a Hard
Drive" on page 117. See "Using
the System Setup Program and
UEFI Boot Manager" on
page 35 for information on
setting the order of boot
devices.

No boot sector on

hard drive.

Incorrect configuration
settings in System Setup
program, or no operating
system on hard drive.

Check the hard-drive
configuration settings in the
System Setup program. See
"Using the System Setup
Program and UEFI Boot
Manager" on page 35. If
necessary, install the operating
system on your hard drive. See
your operating system
documentation.

No timer tick

interrupt.

Faulty system board.

See "Getting Help" on
page 129.

PCI BIOS failed

to install.

PCIe device BIOS (Option
ROM) checksum failure
detected during shadowing.

Cables to expansion card(s)
loose; faulty or improperly
installed expansion card(s).

Reseat the expansion card(s).
Ensure that all appropriate
cables are securely connected
to the expansion card(s). If the
problem persists, see
"Troubleshooting Expansion
Cards" on page 118.

PCIe Training

Error: Expected

Link Width is

x

,

Actual Link Width

is

y

.

Faulty or improperly
installed PCIe card in the
specified slot.

Reseat the PCIe card in the
specified slot number. See
"Troubleshooting Expansion
Cards" on page 118. If the
problem persists, see "Getting
Help" on page 129.

Message

Causes

Corrective Actions

Mayzie_HOM.book Page 26 Monday, August 31, 2009 9:33 PM

Advertising