Dell PowerEdge T110 - Manual (Page 42)

42
Using the System Setup Program and UEFI Boot Manager
Integrated Devices Screen
USB Flash Drive
Emulation Type
(Auto default) Determines the emulation type for a USB flash drive.
Hard disk allows the USB flash drive to act as a hard
drive. Floppy allows the USB flash drive to act as a
removable diskette drive.
Auto automatically chooses the appropriate emulation
type for the device. If you install a device in this slot that
is configured as a removable diskette drive, you must
manually set the emulation type to Floppy.
Boot Sequence Retry
(Disabled default) If this field is enabled and the system has failed to boot,
the system will reattempt to boot after 30 seconds.
Option Description
User Accessible
USB Ports
(All Ports On default) Enables or disables the user accessible USB ports.
Options are All Ports On, Only Back Ports On, and All
Ports Off.
Internal USB Port
(On default) Enables or disables the internal USB port.
Embedded Gb NIC1
(NIC1 default: Enabled
with PXE;
Other NICs: Enabled) Enables or disables the integrated NIC. Options are
Enabled, Enabled with PXE, Enabled with iSCSI Boot,
and Disabled. PXE support allows the system to boot
from the network.
MAC Address Displays the MAC address for the integrated NIC.
OS Watchdog Timer
(Disabled default) Sets a timer to monitor the operating system for activity,
and aids in recovery if the system stops responding.
When Enabled, the operating system is allowed to
initialize the timer. When Disabled, the timer is not
initialized.
NOTE:
This feature is usable only with operating systems
that support WDAT implementations of the Advanced
Configuration and Power Interface (ACPI) 3.0b
specification.
Option Description
Mayzie_HOM.book Page 42 Monday, August 31, 2009 9:33 PM