Dell PowerEdge T110 - Manual (Page 62)

62
Installing System Components
3 Remove the front bezel. See "Removing the Front Bezel" on page 59.
4 Slide the drive release latch in the direction of the arrow to release the
shoulder screw. See Figure 3-5.
5 Pull the tab to remove the EMI filler panel.
Figure 3-5. Removing and Installing the EMI Filler Panel
Installing an EMI Filler Panel
1 Gently slide the EMI filler panel into the bay until it clicks into place. See
Figure 3-5.
2 Replace the front bezel. See "Installing the Front Bezel" on page 60.
3 Close the system. See "Closing the System" on page 58.
1 drive release latch 2 shoulder screws (2)
3 EMI filler panel 4 tab
3
2
4
1
Mayzie_HOM.book Page 62 Monday, August 31, 2009 9:33 PM