Front bezel, Removing the front bezel – Dell PowerEdge T110 User Manual

Page 59

Advertising
background image

Installing System Components

59

Front Bezel

CAUTION:

Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.

Removing the Front Bezel

1 Turn off the system and attached peripherals, and disconnect the system

from the electrical outlet.

2 Open the system. See "Opening the System" on page 57.
3 Slide the drive release latch in the direction of the arrow until it releases

the front bezel from its side hinges. See Figure 3-3.

NOTE:

The drive release latch secures and releases the front bezel and helps

to secure the drives.

4 Carefully tilt the front bezel away from the chassis and lift it out as shown

in Figure 3-3.

5 Close the system. See "Closing the System" on page 58.

Mayzie_HOM.book Page 59 Monday, August 31, 2009 9:33 PM

Advertising