Dell PowerEdge T110 User Manual
Page 99
Advertising
Installing System Components
99
Figure 3-22.
Removing the Link Bracket Lock
6 Remove the mounting screw holding the control panel assembly to the
front chassis. See Figure 3-23.
7 Lift the control panel assembly out of the system.
8 Disconnect the control panel cable from the control panel assembly:
CAUTION:
Do not pull on the cable to unseat the connector. Doing so can damage
the cable.
a
Press the metal tabs on the ends of the cable connector.
b
Gently work the connector out of the socket.
1
link bracket lock
1
Mayzie_HOM.book Page 99 Monday, August 31, 2009 9:33 PM
Advertising