Replacing the camera module – Dell Inspiron 13 (N3010, Mid 2010) User Manual
Page 10
13.
Lift the camera module off the display cover.
Replacing the Camera Module
1.
Follow the instructions in
Before You Begin
.
2.
Connect the display cable to the connector on the camera module.
3.
Replace the tape that secures the display cable to the camera module.
4.
Place the camera module in position and replace the two screws that secure the camera module to the display cover.
5.
Replace the display panel (see
Replacing the Display Panel
).
6.
Replace the display bezel (see
Replacing the Display Bezel
).
7.
Replace the display assembly (see
Replacing the Display Assembly
).
8.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
9.
Replace the keyboard (see
Replacing the Keyboard
).
10.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
11.
Replace the memory-module cover (see
Replacing the Memory-Module Cover
).
12.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.