Dell Inspiron 13 (N3010, Mid 2010) - Manual (Page 33)

2. Align the notch in the memory module with the tab in the memory- module connector.
3. Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear
the click, remove the memory module and reinstall it.
4. Replace the memory-module cover (see Replacing the Memory-Module Cover ).
5. Replace the battery (see Replacing the Battery ).
6. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer:
Click Start ® Control Panel® System and Security® System.
Back to Contents Page
NOTE: If the memory module is not installed properly, the computer may not boot.
1 tab 2 notch
3 memory-module connector
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.