Dell Inspiron 13 (N3010, Mid 2010) - Manual (Page 19)

11. In sequential order (indicated on the display hinge), remove the four screws that secure the display assembly to the computer base.
12. Lift the display assembly off the computer.
Replacing the Display Assembly
1. Follow the instructions in Before You Begin .
2. Place the display assembly in position.
3. In sequential order (indicated on the display hinge), replace the four screws that secure the display assembly to the computer base.
4. Connect the display cable to the connector on the system board.
5. Replace the display cable grounding screw.
6. Turn the computer over and replace the two screws that secure the display assembly to the computer base.
7. Replace the palm rest assembly (see Replacing the Palm Rest Assembly ).
8. Replace the keyboard (see Replacing the Keyboard ).
9. Replace the memory module(s) (see Replacing the Memory Module(s) ).
10. Replace the memory-module cover (see Replacing the Memory-Module Cover ).
11. Replace the battery (see Replacing the Battery ).
Display Bezel
1 display cable 2 display cable grounding screw
3 screws (4) 4 display assembly
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.