Dell Inspiron 13 (N3010, Mid 2010) User Manual
Page 48
2.
Place the VGA connector board on the computer base and replace the two screws that secure the VGA connector board to the computer base.
3.
Slide the VGA connector cable into the connector on the system board and press down on the connector latch to secure the cable.
4.
Replace the middle cover (see
Replacing the Middle Cover
).
5.
Replace the display assembly (see
Replacing the Display Assembly
).
6.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
7.
Replace the keyboard (see
Replacing the Keyboard
).
8.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
9.
Replace the memory-module cover (see
Replacing the Memory-Module Cover
).
10.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.