Dell Inspiron 13 (N3010, Mid 2010) - Manual (Page 24)

6. Remove the two screws (one on each display hinge) that secure the display hinges to the display cover.
7. Lift the display hinges off the display cover.
Replacing the Display Hinges
1. Follow the instructions in Before You Begin .
2. Place the display hinges in position and replace the two screws (one on each display hinge) that secure the display hinges to the display cover.
3. Push the display hinge cap tabs into the slots on the display hinges.
4. Replace the display panel (see Replacing the Display Panel ).
5. Replace the display bezel (see Replacing the Display Bezel ).
6. Replace the display assembly (see Replacing the Display Assembly ).
Back to Contents Page
1 hinge cap 2 display hinge
3 hinge cap tabs (2)
1 screws (2) 2 display hinges (2)
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.