Dell Inspiron 13 (N3010, Mid 2010) - Manual (Page 6)

Back to Contents Page
Memory-Module Cover
Dell™ Inspiron™ N3010 Service Manual
Removing the Memory-Module Cover
Replacing the Memory-Module Cover
Removing the Memory-Module Cover
1. Follow the instructions in Before You Begin .
2. Remove the battery (see Removing the Battery ).
3. Loosen the captive screw that secures the memory-module cover to the computer base.
4. Pry the memory-module cover up and lift it out of the computer base.
Replacing the Memory-Module Cover
1. Follow the instructions in Before You Begin .
2. Align the tabs on the memory-module cover with the slots on the computer base and place the memory-module cover in position.
3. Gently snap the memory-module cover into place.
4. Tighten the captive screw that secures the memory-module cover to the computer base.
5. Replace the battery (see Replacing the Battery ).
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for
other Dell computers.
1 captive screw 2 memory-module cover
3 memory-module cover tabs (3)