Drive panel, Removing the drive panel – Dell XPS 710 User Manual
Page 43
Removing and Installing Parts: Dell XPS 700 Service Manual
parts.htm[4/11/2014 11:32:11 AM]
7. Connect the power cable to the hard drive.
8. Connect the hard drive data cable to the hard drive.
1
power cable
2
data cable
9. Replace the computer cover (see
).
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
10. Connect the computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
Drive Panel
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
Removing the Drive Panel
.
2. Remove the computer cover (see
3. Grasp the drive release latch and slide it towards the base of the computer until the drive panel snaps open.