Dell XPS 710 User Manual

Page 75

Advertising
background image

System Setup: Dell XPS 700 Service Manual

syssetup.htm[4/11/2014 11:32:17 AM]

Off — All floppy drives are

disabled.

USB — USB floppy drives are

enabled

Internal — The integrated floppy

drive is enabled.

Read Only — The integrated floppy

drive is enabled with read-only

access.

NOTE:

Operating systems with USB

support will recognize USB floppy drives

regardless of this setting.

SATA Drives 0 through 5

(On default)

Enables or disables drives attached to the

SATA connectors on the system board.

Off — A device attached to the

interface is not usable.

On — A device attached to the

interface is usable.

RAID On - A device attached to

the interface is configured for RAID

(see "About Your RAID

Configuration" in your Owner's

Manual).

PATA Drives 0 through 1

(On default)

Enables or disables drives attached to the

ATA connectors on the system board, and

lists the controller details.

Off — A device attached to the

interface is not usable.

On — A device attached to the

interface is usable.

SMART Reporting

(Off default)

Determines whether hard-drive errors for

internal drives are reported during

system startup.

Off — Errors are not reported.

On — Errors are reported.

Onboard Devices
Integrated NIC

(On default)

Enables or disables the integrated network

interface controller (NIC).

Off — The integrated NIC is

disabled.

On — The integrated NIC is

enabled.

On w/PXE — The integrated NIC is

on (with PXE enabled).

NOTE:

PXE is required only if you are

booting to an operating system located

on another computer. If a boot routine is

not available from the remote system,

the computer attempts to boot from the

next device listed in the boot sequence.

Integrated Audio

(On default)

Enables or disables the onboard audio

controller.

Off — Integrated audio is disabled.

Advertising