Dell XPS 710 - Manual (Page 55)

Removing and Installing Parts: Dell XPS 700 Service Manual
parts.htm[4/11/2014 11:32:11 AM]
1 power cable 2 data cable
9. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
10. Replace the drive panel (see Replacing the Drive Panel ).
11. Replace the computer cover (see Replacing the Computer Cover ).
NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the
computer.
12. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
13. Enter system setup (see Entering System Setup) and select the appropriate Drive option.
Processor Airflow Shroud
CAUTION: Before you perform this procedure, follow the safety instructions located in the Product
Information Guide.
Removing the Processor Airflow Shroud
1. Follow the procedures in Before You Begin .
2. Remove the computer cover (see Removing the Computer Cover ).