Dell XPS 710 - Manual (Page 78)

System Setup: Dell XPS 700 Service Manual
syssetup.htm[4/11/2014 11:32:17 AM]
NOTE: When the system password field is
locked, you can no longer disable
password security by pressing <Ctrl>
<Enter> when the computer starts.
Execute Disable
(On default)
Enables or disables Execute Disable
Memory Protection technology.
Off — Execute Disable Memory
Protection technology is disabled.
On — Execute Disable Memory
Protection technology is enabled.
Power Management
AC Recovery
(Off default)
Specifies how the computer will behave
when AC power is restored after an AC
power loss.
Off — The system stays off after
AC power is restored.
On — The system powers on after
AC power is restored.
Last — The system returns to the
previous state after AC power is
restored.
Auto Power On
(Off default)
Disables or selects when to automatically
turn on the computer.
Off — Do not use the Auto Power
Time.
Everyday — Turn the computer on
every day at the time set in Auto
Power Time.
Weekdays — Turn the computer
on Monday through Friday at the
time set in Auto Power Time.
NOTE: This feature does not work if you
turn off your computer using a power
strip or surge protector.
Auto Power Time Specifies the time to automatically turn on
the computer.
Change the time to automatically turn on
the computer by pressing the up- or
down-arrow key to increase or decrease
the numbers, or type the numbers in the
appropriate time field.
NOTE: This feature does not work if you
turn off your computer using a power
strip or surge protector.
Suspend Mode
(S3 default)
Specifies the power management suspend
mode.
S1 — The computer resumes more
quickly from sleep mode.
S3 — The computer conserves
more power when not in use
(system memory remains active).