Removing the computer stand, Replacing the computer cover, Replace the computer cover (see – Dell XPS 710 User Manual

Page 60: Replacing the computer, Cover

Advertising
background image

Removing and Installing Parts: Dell XPS 700 Service Manual

parts.htm[4/11/2014 11:32:11 AM]

9. Enter system setup (see System Setup) and restore the settings you recorded in

step 1

.

10. Properly dispose of the old battery. See the Product Information Guide for battery disposal information.

Removing the Computer Stand

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

CAUTION:

Your computer is heavy and can be difficult to maneuver. Seek assistance before attempting to

lift, move, or tilt the computer and always lift correctly to avoid injury; avoid bending over while lifting.

CAUTION:

The computer stand should be installed at all times to ensure maximum system stability. Failure

to install the stand could result in the computer tipping over, potentially resulting in bodily injury or

damage to the computer.

1. Follow the procedures in

Before You Begin

.

2. Loosen the captive screw securing the stand to the base of the computer.

3. Gently slide the stand back, towards the rear of the computer, then pull the stand away from the computer to remove it.

1

computer stand

2

captive screw

Replacing the Computer Cover

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

Advertising