Dell Dimension 5150C - Manual (Page 11)

Removing and Installing Parts: Dell Dimension 5150C Service Manual
file:///T|/htdocs/systems/dim5150C/en/sm/parts1.htm[10/31/2012 8:21:07 AM]
6. Align the notch on the bottom of the module with the crossbar in the connector.
NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply
equal force to each end of the module.
7. Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
8. Replace the computer cover .
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
9. Connect your computer and devices to electrical outlets, and turn them on.
10. When a message appears stating that memory size has changed, press <F1> to continue.
11. Log on to your computer.
12. Right-click the My Computer icon and click Properties.