Replacing the external modem connector – Dell Dimension 5150C User Manual
Page 32
Removing and Installing Parts: Dell Dimension 5150C Service Manual
file:///T|/htdocs/systems/dim5150C/en/sm/parts1.htm[10/31/2012 8:21:07 AM]
b. Connect the modem cable to the modem.
c. Use a Phillips screwdriver to replace and tighten the two screws that secure the modem to the system board.
.
Replacing the External Modem Connector
1. Follow the procedures in "
2. Remove the
NOTE:
Note the routing of the modem cable as you remove the modem. You must route the cable properly when you
replace the modem to prevent the cable from being pinched or crimped.
4. Remove the modem cable from the modem.
5. Remove the external modem connector:
a. Remove the screw that secures the external modem connector.
b. Slide the external modem connector away from the slot that holds the modem connector in place.
c. Lift the modem cable and connector from the computer.
6. To install a new modem cable and external modem connector:
a. Attach the modem cable to the external modem connector.
b. Align the external modem connector with the slot on the back on the computer.
c. Replace the screw that secures the external modem connector in place.