Installing a cd/dvd drive – Dell Dimension 5150C User Manual
Page 19
Advertising
Removing and Installing Parts: Dell Dimension 5150C Service Manual
file:///T|/htdocs/systems/dim5150C/en/sm/parts1.htm[10/31/2012 8:21:07 AM]
NOTE:
The interface cable is held in place by the metal drive bracket and does not need to be removed from the drive.
5. Disconnect the interface cable from the interface cable connector on the
.
6. Set the drive aside in a secure location.
Installing a CD/DVD Drive
1. Unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for your computer. If you are
installing an IDE drive, configure the drive for the cable select setting.
2. Connect the interface cable to the interface cable connector on the system board. See
Advertising