Processor, Removing the processor – Dell Dimension 5150C User Manual
Page 28
Removing and Installing Parts: Dell Dimension 5150C Service Manual
file:///T|/htdocs/systems/dim5150C/en/sm/parts1.htm[10/31/2012 8:21:07 AM]
1 fan assembly
2 fan cable connector
3 fan release tab
Processor
Removing the Processor
NOTICE:
Do not perform the following steps unless you are familiar with hardware removal and replacement.
Performing these steps incorrectly could damage your system board. For technical service, see "Contacting Dell" in the
Owner's Manual.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
2. Open the
CAUTION:
The heat-sink assembly can get very hot during normal operation. Be sure that the assembly
has had sufficient time to cool before you touch it.
NOTICE:
Before touching anything inside your computer, ground yourself by touching an unpainted metal surface,
such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to
dissipate any static electricity that could harm internal components.
3. Remove the
4. Open the processor cover.