Processors, Removing a processor – Dell PowerEdge VRTX User Manual
Page 42
1. SD vFlash card
2. SD vFlash card slot
Processors
Use the following procedure when:
•
Installing an additional processor
•
Replacing a processor
Removing A Processor
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1.
Remove the server module from the enclosure.
2.
Open the server module.
WARNING: The processor and heat sink can become extremely hot. Be sure the processor has had sufficient
time to cool before handling.
3.
If required, remove the cooling shroud.
CAUTION: Never remove the heat sink from a processor unless you intend to remove the processor. The heat
sink is necessary to maintain proper thermal conditions.
4.
Loosen the retention sockets that secure the heat sink to the server module system board.
5.
Remove the heat sink.
42