Dell Axim X50 - Manual (Page 74)

www
.dell.com | support.dell.com
74
Adding and Removing Programs
Error Message When Installing Software
When installing software on your device, you may receive the following
error message:
The program you have installed may not display
properly because it was designed for a previous
version of Microsoft
®
Windows Mobile™ software.
To correct the error:
1 Tap ok to continue installing the software program.
2 Run the program in portrait mode. See "Changing the Display Mode
on Your Device" on page 74.
NOTE:
Most device programs function with the Windows Mobile 2003 Second
Edition operating system when using portrait mode. Dell cannot guarantee
proper functioning of a program that was not written for Windows Mobile 2003
Second Edition.
NOTE:
The Dell Axim X50 has the Windows Mobile 2003 Second Edition
operating system installed. Most device software packages currently available
were designed for previous versions of Windows Mobile. If you need technical
assistance with the software you are trying to install, contact the manufacturer
of the software. Dell does not provide support for third-party electronics
and accessories.
For more information on the Dell™ Electronics and Accessories Technical
Support Policy, search for Dell Knowledge Base article RA1062902 at
support.dell.com.
Changing the Display Mode on Your Device
To change the display mode from landscape to portrait:
1 Tap the Start button and tap Settings.
2 In the Settings window, tap the System tab and tap Screen.
3 In the Screen window, tap Portrait to select portrait mode.
4 Tap ok and close the window.
NOTE:
To change the display mode from portrait to landscape, follow the steps
in reverse order.