Removing the stand assembly, Procedure – Dell Inspiron 20 (3048, Early 2014) User Manual
Page 16
Advertising
Removing the Stand Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Place the computer face down on a soft cloth or a clean surface.
2 Release the tabs on the stand cover.
3 Slide and remove the stand cover away from the computer.
1
stand cover
2
back cover
4 Remove the screws that secure the stand assembly to the display-panel
base.
16
Advertising